Heater Installation & Replacement

24-HOUR ANSWERING SERVICE

NO OVERTIME CHARGES - EVER

LICENSE #401802

SERVING SACRAMENTO SINCE 1981

24/7 Emergency Service Available

New heating system—sized right, installed right, priced upfront. No surprises on install day.

Free In-Home Estimates

Financing Options Available

Licensed Since '81 (#401802)

All Permits & Inspections Handled

Time for a New Heater?

If you're dumping money into repairs every winter, or your system's old enough to vote, it might be time to stop patching and start fresh.

Read More

Nobody wakes up excited to buy a new heater. But at some point, the math stops making sense on repairs.Here's when we tell people to consider replacement:The age question: Gas furnaces last 15-25 years. Wall heaters can go longer if they're simple. Heat pumps, 15-20. If yours is pushing those numbers and needing work, you're on borrowed time.The repair math: We just quoted you $1,200 for a new control board on a 20-year-old furnace. That's a tough pill. New system might be $6,000-10,000 depending on what you need—but it comes with warranties, efficiency, and another 20 years.The efficiency gap: Furnaces from the '90s run around 70-80% efficiency. New ones hit 95-98%. On a $200/month gas bill, that's real money back in your pocket.The comfort issues: Hot spots, cold rooms, system that can't keep up when it actually gets cold. Sometimes that's ductwork. Sometimes it's a system that was never sized right for your house.We'll look at your setup and give you a straight answer. If it makes sense to repair, we'll tell you. If replacement is the smarter play, we'll show you why.

System Over 20 Years Old

Repairs Costing More Than They Should

Energy Bills Keep Climbing

House Never Feels Comfortable

1

In-Home Assessment

We look at your house, your ducts, your current setup. Then we tell you what actually makes sense.

Learn More

This isn't a sales pitch disguised as an estimate. It's us figuring out what your house actually needs.We check: square footage and layout, insulation situation, existing ductwork (size, condition, whether it's even usable), gas line capacity, where your current system is and whether a new one fits there.Then we do the load calculation—the math that tells us how much heating capacity your house actually needs. Not "close enough." Not "what we have on the truck." The right size.Oversized system short-cycles, never dehumidifies properly, wears out faster. Undersized system runs constantly and can't keep up in January. Either way, you're uncomfortable and wasting money.We'll also tell you if your ducts are the real problem. Sometimes a new heater won't fix cold rooms if the ductwork is undersized or leaking into the attic.This visit is free. Takes about an hour. No obligation.

2

Options, Not Pressure

Three systems at three price points. We explain the differences. You decide what fits.

Learn More

After the assessment, you get three options:Budget-friendly: Gets the job done, meets code, reliable equipment. If you're selling the house or watching every dollar, this makes sense.Mid-range: Better efficiency, quieter operation, longer warranties. This is what most people pick. Good balance of upfront cost and long-term value.Top-tier: Highest efficiency (96-98%), variable-speed everything, best warranties, quietest operation. Costs more upfront, saves the most over time.Each option includes: equipment specs, complete installation scope, total price (not "starting at"), permit fees, warranty details.We don't hide costs. The price you see is the price you pay. If something changes during install—rarely happens—we eat it, not you.Financing available if you need it. Approval takes five minutes.

3

Installation Day

We show up on time, protect your home, and get it done right. Usually one day.

Learn More

Install day is scheduled in advance. We confirm the night before. Crew shows up when we said we would.First thing: drop cloths down, shoe covers on. Your house isn't a job site.What happens: Old system comes out. New system goes in. Gas lines connected and leak-tested. Venting installed (PVC for high-efficiency units). Electrical connections made. Thermostat installed or replaced. Ductwork connected and sealed.We pull all permits and schedule the city inspection. You don't deal with any of that.Most installs are done in one day. Bigger jobs—like converting from a swamp cooler or adding ductwork—might be two days. We'll tell you upfront.Our crews are background-checked and drug-tested. Same standard as our service techs.

4

Startup & Walkthrough

We fire it up, test everything, and show you how it works before we leave.

Learn More

We don't just install it and hand you the keys. We commission the system.That means: combustion analysis to verify it's burning clean, gas pressure dialed to manufacturer specs, airflow measured at each register, all safety controls tested, thermostat programmed and explained.Then we walk you through it. How to use the thermostat (even if it seems obvious). What the indicator lights mean. Where the filter is and how often to change it. What's covered under warranty and how to reach us if something's off.You get all the paperwork: equipment manuals, warranty registration (we handle it), permit records, our direct line.White-glove cleanup. Mechanical room looks better than when we started.

Fixed-Price Installs

The quote is the price. No change orders, no 'we found something' surprises.

Financing Available

Approval in minutes. Multiple terms. Makes a new system affordable.

Right-Sized Systems

Load calculations, not guesswork. Your house gets exactly what it needs.

Permits Handled

We pull permits, schedule inspections, deal with the city. You don't.

How do I know if I need a new heater or just a repair?

If your heater is over 15 years old, needs frequent repairs, or your energy bills keep climbing, replacement usually makes more sense. We'll give you honest options—if a $200 repair buys you five more years, we'll tell you that.

What size water heater do I need?

Depends on household size. General rule for tank heaters: 30-40 gallons for 1-2 people, 40-50 gallons for 3-4 people, 50-80 gallons for 5+ people. Tankless sizing is based on flow rate and temperature rise. We'll calculate exactly what you need.

How long does heater installation take?

Most standard replacements take one day. If we're adding ductwork, changing fuel types, or dealing with older homes, it might stretch to two. We'll tell you upfront before we start.

What brands do you install?

We install Carrier, Lennox, and other major brands. We're a Lennox Authorized Dealer, which means our installers are factory-trained and installations meet manufacturer specifications for full warranty coverage.

Do you offer financing for new heater installation?

Yes. We have financing options with approved credit. Ask us about current offers when we come out for your estimate.

Will you remove my old heater?

Absolutely. Removal and disposal of your old equipment is included in every installation. We don't leave you with a furnace sitting in your driveway.

Ready to Talk About a New Heater?

Free estimate. No pressure. Just honest answers about what your house needs.